You are here: Lift control cables
Assembly guidelines for lift control cables

Genereal notes

These cables can be used within a temperature range from -15°C to +70°C. As for conductor temperature raising due to current load, take notice of VDE 01000.

The inner bending radius of the cable must not be less than 40 times cable diameter.

Maximum suspension hright depends on the carrrying core (see specifications). The maximum liad mist nit be exeeded by more than 10%.

The transporting drum should be driven to the application place. If possible, avoid rolling the drum. Otherwise the drum must be rolled o the floor only in the direction given in picture 1.

Having cabling problems?
Lapp Insulator is not affiliated with the Lapp Group.