The SKINTOP® MS-SC Screen Connection is the ideal gland for all copper-screened cables. The widely variable clamping ranges greatly simplify mounting and allocation and thus permit economic storage.

With the standard contacting
-  Strip back the outer sheath and screen
-  Make a round cut in the outer sheath approx. 15 mm, along but do not remove the sheath
-  Guide the cable through the cable gland
-  Pull off the outer sheath 

-  Pull back the cable until the connection is made between the cable screen and contact spring
- Turn shut ... and it is ready for use!

With thin wires without an inner sheath

- Strip back the outer sheath
- Pull back the screen braid approx. 15 -20 mm over the outer sheath
- Insert the cables into the cable gland until the contact is made between the cable screen and contact spring
- Turn shut ... and it is ready for use!

When routing the cable screen to another connection
- Expose the screen braid approx. 10mm
- Guide the cable through the cable gland until the connection is made between the cable screen and  contact spring
-Turn shut ... and it is ready for use!