Application

Special Feature

Note

Cable Make-up

ÖLFLEX-FD^® 855 P has been designed to resist extreme stresses: the materials used are halogen-free and consequently environment-friendly.
The cable can be sued in am expanded temperature range and in the case of the unscreened version allow a minimum bending radius of 5 x cable diameter. Thus ÖLFLEX-FD^® 855 P and 855 CP can be used without restriction in the most modern automated manufacturing systems, inside and outside, and meet the highest service life requirements.

Because of the small outside diameter of this product, ÖLFLEX-FD^® 855 P and 855 CP attain the smallest absolute bending radii of any power chain cable held as a stock item. The insulating and outer sheath materials are mechanically and chemically resistant in any industrial environment; flexible: down to -30oC. The polyurethane used is flame-retardant as per DIN VDE 0472, Part T.804, Test Type B, corresponding to IEC 332.1.

Please note the assembly guidelines for ÖLFLEX-FD^® cables in power chains* For cross sections of 0.14 mm² to 0.25 mm² see UNITRONIC FD® P
For cross sections of 4.0 mm2 to 35 mm2 see ÖLFLEX-SERVO-FD^® 785 P .
The product conforms to EEC directive 73/23 (Low Voltage Directive) CE.

* Please refer the detailed catalog 2000

ÖLFLEX-FD^® 855 P
Extra fine strands of plain copper wire, core insulation of TPE, cores black with white figures, one lead identified green/yellow as protective conductor, cores stranded in layers with short lay lengths.
Fleece wrapping, outer sheath of special polyurethane based compound, microbe and hydrolysis-resistant, adhesion-free, silver grey (RAL 7001), flame retardant. ÖLFLEX-FD^® CLASSIC 810 CY
A fleece wrapping, TPE inner sheath, screen braiding of copper wires, outer sheath of special polyurethane-based compound, microbe and hydrolysis-resistant, adhesion-free, silver-grey (RAL 7001), flame-retardant. (IEC 332.1).

Cable Sizes available

Part Number

Number of cores in mm²

0027 530 to 0027 376

2 x 0.5 to 25 x 2.5

Intermediate Range Available

No. of Cores :- 2, 3, 4, 5, 6, 7, 12, 18, 20, 25, 27, 30, 36, 41
Cross section (mm²) :- 0.5, 0.75, 1.0, 1.5, 2.5